GORO DENT 10
Filtering device GORO DENT 10 is made with three filtration containers in size of 10".
This filtering device is a three-stage mechanical filtration. It contains two mechanical filtering pads with permissiveness of 5 and 1 micron, and one filtering pad with active coal (permissiveness 5 micron). The device is intended for drinkable water filtration and is suitable for use at stomatological facilities. It removes sand, rust, sludge, and other mechanical impurities from water.
Capacity of the device is for 2 dental chairs. Filtration is located on the beam. The attachment kit, dowels and screws are included.
CAUTION: This device does not replace softening! In places with hard water it is advisable to use a classic softener, which you can find on our website.
Description of the device:
- Size in mm: 500 × 400 × 150
- Weight (when used): 8 kg
Water input parameters:
- Filtration performance (max. flow rate): 200 l/h
- Output conductivity: Not affected
- Product output pressure: Minimal pressure loss
- Microbiological purity: Not affected
- Total hardness: Not affected
Composition:
- Filtering beam (steel, komaxite polish)
- 3 × filtering container 10"
- 2 × filtering pad 10" (1 and 5 micron)
- 1 × filtering pad active coal 10" (5 micron)
- Set for connection of internal threads 1/2"
- Tube
- Teflon tape
- Key for the container 10"