GORO AQUA COMPLET 35, 65
Reverse osmosis GORO AQUA COMPLET 35/65 produces water with conductivity up to 1 µS (ISO 3696 type 2). The GORO AQUA 35 model has a capacity of 4 litres per hour, while the GORO AQUA 65 provides 10 litres per hour. Tank size is optional and available in capacities from 10 to 200 litres.
This device produces demineralized water through water line pressure. It is operated by simply opening or closing the inlet ball valve on the filter.
Composition:
- Beam
- Auxiliary pump
- 3× container for the filtrating pad of size 10"
- 3× filtrating pad 10"
- Container for the membrane of reverse osmosis
- Membrane of reverse osmosis
- Manometer
- Tube
- Valve
Technical specifications:
- Size in mm: 496 × 180 × 420
- Weight: 8 kg
- Tank capacity: 10–200 litres
- Performance of RO: 4 / 10 l/h
- Operational pressure: Independent
- Overall water use: 20–30 %
- Effectivity of removing impurities: 97–99 %
- Conversion of RO: 1:4
- Pressure gradient of RO: 0.05 MPa
- Inlet water: Drinking water (according to ČSL)
CAUTION:
To be used only for the water filtration (input water must be drinking water according to ČSN). Operational pressure of reverse osmosis must be min. 0.30 MPa and max. 1 MPa, with water temperature between 5°C and 38°C. Protect against impact. Never let the temperature drop below 0°C. Do not expose to vacuum or corrosive liquids and gases. The water produced is not drinkable and is not suitable for making drinks. If the device is not in use, it should be operated for at least 60 minutes every 7 days. Reverse osmosis is sensitive to high levels of Fe, Mn, Cl, and water hardness. Do not sanitize – it can destroy the carbon filter and membrane. Do not use the service valve behind the module of the reverse osmosis.