GORO AQUA 65 with performance of 10 l/h
Reverse osmosis GORO AQUA 65 produces demineralized water by water pressure.
Performance of the device is 10 litres per hour. Water must be collected into its own container.
The system is operated or shut down by opening or closing the inlet ball valve on the filter.
Composition:
- Beam
- Auxiliary pump
- 3 × container for filtering pad 10" (white)
- 3 × filtering pad
- Case for reverse osmosis membrane
- Reverse osmosis membrane
- Manometer
- Tube
- Valve
Technical specifications:
- Size in mm: 496 × 180 × 420
- Weight: 8 kg
- Performance of RO: 10 l/h
- Operational pressure: Independent
- Overall water use: 20–30%
- Effectivity of removing impurities: 97–99%
- Conversion of RO: 1:4
- Pressure gradient: 0.05 MPa
- Inlet water: Drinking water (according to ČSL)
CAUTION:
Use only for water filtration (input water must be drinking water according to ČSN). Operational pressure must be between 0.30 and 1 MPa, and temperature between 5 °C and 38 °C. Protect against impact and do not expose to temperatures below 0 °C. Do not expose to vacuum or corrosive liquids and gases.
The filtered water is not drinkable and is not suitable for preparation of beverages. If the device is not in use, it must be operated for at least 60 minutes every 7 days. Reverse osmosis is sensitive to high concentrations of iron (Fe), manganese (Mn), chlorine (Cl) and high hardness. Do not sanitize the unit – doing so can damage the carbon filter and membrane. Do not use the service valve located behind the RO module.