GORO AQUA 35 with performance of 4l/h
Reverse osmosis AQUA 35 produces demineralized water using water pressure.
Performance is 4 l/h at an operational pressure of 0.35 MPa (3.5 bar). Water must be collected in an external container. The reverse osmosis system is operated by opening or closing the inlet ball valve on the filter.
Technical specifications:
- Size in mm: 496 × 180 × 420
- Weight: 8 kg
- Performance of RO: 4 l/h
- Operational pressure: 3.5 bar
- Overall water use: 20–30%
- Effectivity of removing impurities: 97–99%
- Conversion of RO: 1:4
- Pressure gradient of RO: 0.05 MPa
- Inlet water: Drinking water (according to ČSL)
Composition:
- Beam
- 3 × container for filtering pad 10"
- 3 × filtering pad
- Case for reverse osmosis membrane
- Reverse osmosis membrane
- Manometer
- Tube
- Valve
CAUTION:
Use only for filtration of water (input must be drinking water according to ČSN). Operational pressure must be between 0.30 and 1 MPa, and the temperature between 5°C and 38°C. Protect the device from impacts, freezing temperatures (never below 0°C), vacuum, and corrosive liquids or gases.
The filtered water is not drinkable and is not suitable for beverage preparation. If the device is out of operation, it must be run for at least 60 minutes once every 7 days.
The reverse osmosis unit is sensitive to increased levels of iron (Fe), manganese (Mn), chlorine (Cl), and high water hardness. Never sanitize the device – doing so may destroy the carbon filter and membrane. Do not use the service valve located behind the RO module.